Intelligent Surfaces Thermally Switchable between the Highly Rough and Entirely Smooth States

Reversible switching from a highly rough surface to another entirely smooth surface under external stimuli is crucial for intelligent materials applied in the fields of anti-fogging,self-cleaning,oil-water separation and biotechnology.In this work,a thermal-responsive liquid crystal elastomer (LCE) surface covered with oriented micropillars is prepared via a facile two-step crosslinking method coupled with an extrusion molding program.The reversible change of topological structures of the LCE surface along with temperature is investigated by metallographic microscope,atomic force microscopy and optical contact angle measuring system.At room temperature,the LCE sample is filled with plenty of micropillars with an average length of 8.76 μm,resulting in a super-hydrophobic surface with a water contact angle (WCA) of 135°.When the temperature is increased to above the clearing point,all the micropillars disappear,the LCE surface becomes entirely fiat and presents a hydrophilic state with a WCA of 64°.The roughness-related wetting property of this microstructured LCE surface possesses good recyclability in several heating/cooling cycles.This work realizes a truly reversible transformation from a highly rough surface to an entirely smooth surface,and might promote the potential applications of this dynamic-responsive LCE surface in smart sensors and biomimetic control devices.     

Measurement and modeling on hydrodynamic forces and deformation of an air bubble approaching a solid sphere in liquids

The interaction between bubbles and solid surfaces is central to a broad range of industrial and biological processes. Various experimental techniques have been developed to measure the interactions of bubbles approaching solids in a liquid. A main challenge is to accurately and reliably control the relative motion over a wide range of hydrodynamic conditions and at the same time to determine the interaction forces, bubble–solid separation and bubble deformation. Existing experimental methods are able to focus only on one of the aspects of this problem, mostly for bubbles and particles with characteristic dimensions either below 100 μm or above 1 cm. As a result, either the interfacial deformations are measured directly with the forces being inferred from a model, or the forces are measured directly with the deformations to be deduced from the theory. The recently developed integrated thin film drainage apparatus (ITFDA) filled the gap of intermediate bubble/particle size ranges that are commonly encountered in mineral and oil recovery applications. Equipped with side-view digital cameras along with a bimorph cantilever as force sensor and speaker diaphragm as the driver for bubble to approach a solid sphere, the ITFDA has the capacity to measure simultaneously and independently the forces and interfacial deformations as a bubble approaches a solid sphere in a liquid. Coupled with the thin liquid film drainage modeling, the ITFDA measurement allows the critical role of surface tension, fluid viscosity and bubble approach speed in determining bubble deformation (profile) and hydrodynamic forces to be elucidated. Here we compare the available methods of studying bubble–solid interactions and demonstrate unique features and advantages of the ITFDA for measuring both forces and bubble deformations in systems of Reynolds numbers as high as 10. The consistency and accuracy of such measurement are tested against the well established Stokes–Reynolds–Young–Laplace model. The potential to use the design principles of the ITFDA for fundamental and developmental research is demonstrated.     

g-C3N4/rGO杂化催化剂的简易合成及其对罗丹明B的光催化降解作用

在空气中直接加热三聚氰胺和氧化石墨烯(GO)的混合物制备了g-C3N4/rGO杂化催化剂.实验结果表明,混合物中的g-C3N4保留了石墨型氮化碳原始的特征结构, g-C3N4和还原的氧化石墨烯(rGO)之间的异质结主要通过π-π作用构筑.当原料中三聚氰胺/GO的质量比是800/1时,所得催化剂对罗丹明B的催化作用最强,其一阶动力学常数是纯g-C3N4的2.6倍.这种强化作用主要是由于rGO促进了光生电子-空穴对的分离.此外, g-C3N4/rGO还表现出显著的pH值敏感特性,催化降解速率随pH的降低而增加.当pH =1.98时,其一阶动力学常数是纯g-C3N4的8.6倍.这是由于酸性条件下质子(H+)消耗掉光生电子,促进了空穴对罗丹明B的氧化作用,其中rGO充当了一个快速的光生电子转移平台.     

Postfunctionalization of BN‐Embedded Polycyclic Aromatic Compounds for Fine‐Tuning of Their Molecular Properties

New BN‐embedded, thiophene‐fused, polycyclic aromatic compounds with planar geometry were designed and synthesized. The molecules showed excellent stability and chemical robustness. Postfunctionalization on this skeleton was demonstrated with a series of electrophilic bromination, palladium‐catalyzed cross‐coupling, and Knoevenagel condensation reactions. The π skeleton remained intact during these late‐stage transformations. The optical and electronic properties have been well tuned through incorporation of electron‐rich and ‐deficient groups on the backbone. This work shows the great advantage of the postfunctionalization strategy on BN‐containing polycyclic aromatic compounds for fast diversification and materials screening.     

Deoxygenation of methyl laurate to hydrocarbons on silica-supported Ni-Mo phosphides: Effect of calcination temperatures of precursor

SiO2-supported Ni-Mo bimetallic phosphides were prepared by temperature-programmed reduction(TPR) method from the phosphate precursors calcined at different temperatures. Their properties were characterized by means of ultraviolet-visible diffuse reflectance spectroscopy(UV-Vis DRS), H2temperature-programmed reduction(H2-TPR), X-ray diffraction(XRD), transmission electron microscopy(TEM), CO chemisorption, H2 and NH3temperature-programmed desorptions(H2-TPD and NH3-TPD). Their catalytic performances for the deoxygenation of methyl laurate were tested in a fixed-bed reactor. When the precursors were calcined at 400 and 500?C, respectively, Ni Mo P2 phase could be formed apart from Ni2 P and Mo P phases in the prepared C400 and C500 catalysts. However, when the precursors were calcined at600, 700 and 800°C, respectively, only Ni2 P and Mo P phases could be detected in the prepared C600, C700 and C800 catalysts. Also, in C400, C500 and C600 catalysts, Mo atoms were found to be entered in the lattice of Ni2 P phase, but the entering extent became less with the increase of calcination temperature. As the calcination temperature of the precursor increased, the interaction between Ni and Mo in the prepared catalysts decreased, and the phosphide crystallite size tended to increase, subsequently leading to the decrease in the surface metal site density and the acid amount. C600 catalyst showed the highest activity among the tested ones for the deoxygenation of methyl laurate. As the calcination temperature of the precursor increased, the selectivity to C12 hydrocarbons decreased while the selectivity to C11 hydrocarbons tended to increase. This can be mainly attributed to the decreased Ni-Mo interaction and the increased phosphide particle size. In sum, the structure and performance of Ni-Mo bimetallic phosphide catalyst can be tuned by the calcination temperature of precursor.     

Merging Photoredox and Nickel Catalysis: The Direct Synthesis of Ketones by the Decarboxylative Arylation of α‐Oxo Acids

The direct decarboxylative arylation of α‐oxo acids has been achieved by synergistic visible‐light‐mediated photoredox and nickel catalysis. This method offers rapid entry to aryl and alkyl ketone architectures from simple α‐oxo acid precursors via an acyl radical intermediate. Significant substrate scope is observed with respect to both the oxo acid and arene coupling partners. This mild decarboxylative arylation can also be utilized to efficiently access medicinal agents, as demonstrated by the rapid synthesis of fenofibrate.     

Aryne‐Induced Novel Tandem 1,2‐Addition/(3+2) Cycloaddition to Generate Imidazolidines and Pyrrolidines

A new “single‐flask” method was developed for the synthesis of imidazolidines and pyrrolidines with high stereoselectivity. First, a Schiff base was arylated with an aryne. Second, an intramolecular proton transfer took place from the methylene position to the anionic aryne ring. Third, the resultant ylide reacted with a second equivalent of the same Schiff base in situ or an electron‐deficient alkene through a (3+2) cycloaddition. These sequential tandem 1,2‐addition/(3+2) cycloaddition reactions led to the desired heterocycles in 63–88 % yields.     

Photoinduced Copper‐Catalyzed Regioselective Synthesis of Indoles: Three‐Component Coupling of Arylamines,Terminal Alkynes,and Quinones

The first successful example of a visible‐light‐induced copper‐catalyzed process for C? H annulation of arylamines with terminal alkynes and benzoquinone is described. This three‐component reaction allows use of a variety of commercial terminal alkynes as coupling partners for the one‐step regioselective synthesis of functionalized indoles. Moreover, the current process represents a sustainable and atom‐economical approach for the preparation of complex indoles from easily accessible starting materials under visible‐light irradiation, without the need for expensive metals and harsh reaction conditions.